济南德成铝业有限公司
联系人:李经理
手机:15614693658
电话:0531-87887788
地址:济南市平阴县翠屏街东首
当前位置:首页-新闻资讯新闻资讯
硬化状态直接决定铝卷的切割速度
2018-4-13 15:59:11

铝卷是一种比较特殊的原材料,它从外观上来看,是比较轻巧,在搬运以及移动的时候也可以发现,这样的原材料十分轻巧。通常铝卷都是呈现扁平形状的。

Aluminum rolls are a special kind of raw material. It is light in appearance, and can be found when moving and moving. This material is very light. Usually aluminum rolls are flat.

首先需要注意的是铝卷的的厚度问题,人们在选择铝卷的时候,总觉的需要选用最厚的铝卷,然而这样的想法是错误的,这样会导致施工难度更大,也会带给切割等程序一些麻烦。

First of all, we need to pay attention to the thickness of aluminum rolls. When people choose aluminum rolls, they need to choose the thickest aluminum rolls. However, this idea is wrong. This will lead to more difficulty in construction and some problems such as cutting.

铝卷生产厂家

铝卷的H1就是单纯加工硬化状态,它是适用于未经附加热处理,只经加工硬化即获得所需强度的状态。而H2就是代表加工硬化以及不完全退火的状态,是适用于加工硬化程度超过成品规定的要求后,经不完全退火,使强度降低到规定指标产品;而H3也就是加工硬化及稳定化处理的状态,适用于加工硬化后经低温热处理或者由加工过程中的受热作用

The H1 of aluminum coil is simply work hardening state. It is suitable for the state of obtaining the required strength only by working hardening without heating. And H2 is a state that represents work hardening and incomplete annealing. It is applicable to the condition that the degree of hardening is more than the requirements of the finished product. After the incomplete annealing, the strength is reduced to the specified index product; and H3 is the state of the processing hardening and stabilization treatment, which is suitable for heat treatment or processing at low temperature after working hardening. Heat transfer in the process

本文由铝卷生产厂家友情奉献.更多有关的知识请点击:http://www.jndcly.com我们将用最先进的技术.最真诚的态度.为您提供最为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is dedicated to the aluminum producers. More related knowledge, please click: http://www.jndcly.com we will use the most advanced technology. The most sincere attitude. To provide you with the most comprehensive service. More related knowledge will be given to you. Please look forward to it.